FOLD
FOLD
INSTALLATION
FOLD
TROUBLESHOOTING TIPS
FOLD
SERVICE
ATLINKS Communications Canada, Inc. warrants to the
purchaser or gift recipient that if any manufacturing defect
becomes apparent in this product within
WALL MOUNT INSTALLATION
1. Plug the telephone line cord
into the jack in the pocket on
the bottom of the phone.
Problem
Solution
29255 Series
MODULAR JACK REQUIREMENTS
1
You need an RJ11(CA11A) type modular
jack, which is the most common type of
phone jack and might look like the one
pictured here. If you don’t have a modular
jack, call your local phone company to
find out how to get one installed.
No dial tone.
•
Check hook switch to make
sure it pops up.
2
1 year from the original date of purchase, it will be replaced
free of charge, including return transportation.
2. Stuff the excess line cord into
the pocket.
Won't dial out
•
Make sure PULSE/TONE is
set to correct position.
Memory Phone
User's Guide
This warranty does not include damage to the product resulting
from accidents, misuse or leaking batteries.
3
3. Plug the other end of the line
cord in the wall jack.
Phone doesn’t ring
•
•
Make sure RINGER switch
is set to LO or HI.
You might have too many
phones on one line.
Should your product not perform properly during the warranty
period, either:
DESKTOP OR TABLETOP INSTALLATION
1
4. Plug the coiled cord into the
handset. Plug the other end
into the jack on the lower end
of the base.
1. Return it to the selling dealer with proof of purchase for
replacement,
OR
Feedback when
•
This is normal. Power
2. Remove the batteries (where applicable), and pack product
complete with accessories in the original carton (or
equivalent).
dialing in pulse mode
fluctuates with phone
outpulsing.
5. Slip the mounting holes on the
bottom of the telephone over
the wall plate posts and slide
the base down until the phone
is firmly in place. (Wall plate is
not included.)
4
Can’t be heard by other
party
•
•
Make sure phone cord is
securely plugged in.
Make sure other phones
aren't off the hook at the
same time you're using the
phone. It is normal for the
volume to drop when
— Mail prepaid (with proof of purchase) and insured to:
2
ATLINKS Communications Canada, Inc.
c/o Thomson multimedia Ltd.
6
4
7
6. Set the VOLUME switch (on the side of the handset) to the
desired listening volume.
6200 Edwards Boulevard
Mississauga, Ontario Canada L5T 2V7
3
7. Set PULSE/TONE switch (on the side of the handset) to TONE
for touch-tone service, or set it to PULSE for rotary service. If
you don’t know which type of service you have, check with
the phone company.
The provisions of this written warranty are in addition to and not
a modification of or subtraction from the statutory warranties
and other rights and remedies contained in any applicable
legislation, and to the extent that any such provisions purport to
disclaim, exclude or limit any such statutory warranties and
other rights and remedies, such provisions shall be deemed to
be amended to the extent necessary to comply therewith.
additional phones are used
at the same time.
8. Slide the RINGER switch (on top of the base) to the desired
ringer volume.
5
1. Plug the line cord into the jack in the pocket on the bottom of
the phone.
If you are unable to find a qualified servicer for out of warranty
service, you may write to:
2. Run the telephone line cord through the guides on the
bottom of the phone.
ATLINKS Communications Canada, Inc.
Thomson multimedia Ltd.
6
3. Plug the coiled cord into the handset. Plug the other end into
the jack on the lower end of the base.
P.O. Box 0944
Indianapolis, Indiana, U.S.A., 46206-0944
4. Set PULSE/TONE switch (on the side of the handset) to TONE
for touch-tone service, or set it to PULSE for rotary service. If
you don’t know which type of service you have, check with
the phone company.
Attach your sales receipt to this booklet for future reference.
This information is required if service is needed during the
warranty period.
5
Mounting
holes
PURCHASE DATE
____________________________________________________________
5. Slide the RINGER switch (on top of the base) to the desired
volume.
7
NAME OF STORE
____________________________________________________________
6. Set the VOLUME switch (on the side of the handset) to the
desired listening volume.
8
7. Connect the telephone line cord to a modular telephone jack.
We bring good things to life.
FOLD
FOLD
IMPORTANT INFORMATION
TELEPHONE OPERATION
INTERFERENCE INFORMATION
NOTICE: The Industry Canada label identifies certified equipment. This
certification means that the equipment meets certain telecommunica-
tions network protective, operational and safety requirements. The
Industry Canada does not guarantee the equipment will operate to the
user’s satisfaction.
This equipment generates and uses radio frequency energy
which may interfere with residential radio and television
reception if not properly installed and used in accordance with
instructions contained in this manual. Reasonable protection
against such interference is ensured, although there is no
guarantee this will not occur in a given installation. If interfer-
ence is suspected and verified by switching this equipment on
and off, the user is encouraged to try to correct the interference
by one or more of the following measures: Reorient the radio/
television receiver’s antenna, relocate the equipment with
respect to the receiver, plug the equipment and receiver into
separate circuit outlets. The user may also wish to consult a
qualified radio/television technician for additional suggestions.
This equipment has been fully tested and complies with all limits
for Class B computing devices pursuant to part 15 FCC Rules
and Regulations. This apparatus does not exceed the class B
limits for RF noise emissions specified in the RFI regulations of
the Industry Canada.
VOLUME
REDIAL
CHAIN DIALING
You are able to control the listening level with the VOLUME
switch on the side of the handset. It has 3 levels: normal,
medium, and high.
To automatically redial the last number you called:
1. Pick up the handset to get a dial tone.
2. Press REDIAL.
You can link several memory locations in sequence by following
this example:
Before installing this equipment, users should ensure that it is
permissible to be connected to the facilities of the local telecommunica-
tions company. The equipment must also be installed using an
acceptable method of connection. The customer should be aware that
compliance with the above conditions may not prevent degradation of
service in some situations.
Number is For
Memory Location
Long distance access number
Authorization code
7
8
MEMORY
FLASH
Each of the memory buttons is capable of storing phone
numbers that are up to 16 digits. A, B, and C memory locations
are accessible by one press. Memory locations 1-9 require you
to press MEM DIAL for access.
Frequently called long distance number
9
Press the FLASH button instead of the hook switch to
activate custom calling services such as call waiting or call
transfer. Custom calling services are provided by the phone
company.
1. Pick up the handset to get a dial tone.
2. Press MEM DIAL and then press 7.
3. When you hear the access tone, press MEM DIAL and then
press 8.
Repairs to certified equipment should be made by an authorized
Canadian maintenance facility designated by the supplier. Any repairs
or alterations made by the user to this equipment, or equipment
malfunctions, may give the telecommunications company cause to
request the user to disconnect the equipment.
STORING A NUMBER IN MEMORY
1. Pick up the handset.
2. Press the STORE button.
3. Dial the number to be stored (up to 16 digits).
4. Press STORE again.
5. Press a memory location button (A, B, C, or 1-9).
6. Remove the memo log from underneath its plastic cover and
record the name of the person whose number you stored.
7. Hang up the handset.
A/B/C
memory
location
buttons
TEMPORARY
4. At the next access tone, press MEM DIAL and then 9.
Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic
water pipe systems, if present, are connected together. This precaution
may be particularly important in rural areas.
TONE
IMPORTANT: If you make test calls to emergency
numbers, remain on the line and explain the reason
for the call to the dispatcher. Also, make these calls in
off-peak hours, such as early morning or late evening.
If you have pulse service,
you can temporarily
REN NUMBER
On the bottom of this equipment is a label indicating, among
other information, the FCC Registration number and Ringer
Equivalence Number (REN) for the equipment. You must, upon
request, provide this information to your telephone company.
CAUTION: Users should not attempt to make such connections
themselves, but should contact the appropriate electric inspection
authority, or electrician, as appropriate.
change from pulse to tone
service in order to access
A
B
C
services that require tone
dialing (such as getting
information from a local
bank). After dialing the
telephone number, press
and release the tone
INSERTING A PAUSE IN THE DIALING SEQUENCE
Use the REDIAL button to add pauses to a dialing sequence, for
example after you dial 9 for an outside line.
NOTES: This equipment may not be used on coin service provided by
the telephone company.
NOTE: If you make a mistake while storing a number,
hang up and repeat the storing procedure.
ABC
DEF
The REN is useful in determining the number of devices you may
connect to your telephone line and still have all of these devices
ring when your telephone number is called. In most (but not all)
areas, the sum of the RENs of all devices connected to one line
should not exceed 5. To be certain of the number of devices you
may connect to your line as determined by the REN, you should
contact your local telephone company.
1
2
3
GHI
JKL
MNO
Party lines are subject to telephone company tariffs and, therefore, you
may not be able to use your own telephone equipment if you are on a
party line. Check with your local telephone company.
4
PQRS
7
5
6
WXYZ
9
CHANGING A STORED NUMBER
To change a stored number, you just replace it with a different
number using the procedure for storing a number.
TUV
8
button, marked with an
asterisk (*). When you
hang up, your phone
HEARING AID COMPATIBILITY
This telephone system meets FCC/Industry Canada standards for
Hearing Aid Compatibility.
OPER
#
0
*
returns to pulse service.
MEM DIAL STORE REDIAL
DIALING A STORED NUMBER
1. Pick up the handset, and wait for a dial tone.
FLASH
2. Press A, B, or C to access those stored numbers. For
numbers stored at memory locations 1-9, press MEM DIAL
and then number of the location in which the desired number
is stored.
INDUSTRY CANADA NUMBER IS LOCATED ON THE CABINET
BOTTOM
REN NUMBER IS LOCATED ON THE CABINET BOTTOM
ATLINKS Communications Canada Inc.
MEM
DIAL
button
STORE FLASH REDIAL
Model 29255 Series
15405270 (Rev. 3 E/F)
01-02
(An Alcatel /Thomson Multimedia Joint Venture)
© 2001 ATLINKS Communications Canada, Inc.
Trademark(s) ® Registered
button
button
button
Marque(s) ® déposée(s)
Printed in China
FOLD
FOLD
FOLD
FOLD
|