Fujitsu Stereo Amplifier DCU105 3 User Manual

5.1ch Decoder/AV Matrix Unit  
MODEL  
INSTALLATION MANUAL  
Be sure to read this installation manual thoroughly prior to installation and making connections. If  
installation methods or non-standard parts not specified in this installation manual are used, accidents  
or injury may result.  
Professional installation is recommended, contact the place of purchase to schedule an appointment.  
After reading the owner's manual and the installation manual thoroughly, keep them in a safe place for  
future reference.  
To dealers:  
Give this installation manual to the customer after installation and all connections have been  
completed.  
Contents  
Components  
2
3
Before  
installation  
For your safety in using the DCU105  
Names and functions of terminals  
Speaker connection examples  
5
8
Connections  
Installation  
9
Installing the decorder unit  
10  
When measuring frequency response characteristics or carrying out automatic time alignment inside the vehicle  
 
For your safety in using the DCU105  
Warnings and caution signs, illustrated bellow, are posted throughout this manual as well as on the DCU105.  
They show safe and correct ways to handle the product to prevent personal injury to you and others and  
avoid damage to property.  
When reading through the manual, take the time to read through and learn the important information listed in  
this section.  
This "WARNING" sign indicates a situation in which incorrect handling may  
result in death or serious personal injury.  
This "CAUTION" sign indicates a situation in which incorrect handling may result in  
personal injury or may result solely in damage to property.  
This section contains information that can help to prevent problems and  
Tip  
damage to the unit, and also contain other useful information.  
Do not install this product in locations where it may  
obstruct the driver's view, or where it may endanger  
passengers in the vehicle. Otherwise, an accident or  
injury may result.  
Never supply power to another electrical appliance  
by splicing or tapping into this product's power lead  
(battery supply or constant power wire). Otherwise,  
the current capacity of the wire will be exceeded,  
resulting in a fire or electric shock.  
Do not install this product in locations where it may  
interfere with the operation of the steering wheel,  
shift lever, brake pedal, etc. Otherwise, an accident  
or injury may result.  
Never attempt to disassemble or modify the product.  
Otherwise, an accident, fire or electric shock may  
result.  
To prevent damage to the vehicle, confirm the  
locations of hoses, electrical wiring, and the fuel tank  
prior to drilling holes to install this product. Also, take  
all necessary precautions so that the product does  
not interfere, nor come in contact with them.  
Otherwise, a fire may result.  
When replacing fuses, be sure to use fuses of the  
specified capacity (amperage). Otherwise, damage  
to the unit, fire, or an electric shock may result.  
When installing the product into a vehicle with a  
passenger side air bag, never install or secure the  
product to the air bag's cover or in places where it  
may impede air bag deployment. Otherwise, proper  
air bag operation may not be ensured in the event of  
an accident, causing injury or death.  
When installing this product, never use the existing  
nuts or bolts that secure parts of the fuel tank, the  
steering, or braking systems. Otherwise, improper  
steering or braking and / or a fire may result.  
When making holes using drill or similar tool, be sure  
to wear protective eyewear. Otherwise, an injury  
such as loss of eyesight may result.  
To prevent a short circuit from occurring, disconnect  
the battery's negative terminal prior to installing this  
product. Otherwise, an electric shock or injury may  
result.  
Exposed wires must be insulated with electrical tape.  
Otherwise, a short circuit, fire, or electric shock may  
result.  
When using an existing nut and/or bolt from the  
vehicle to ground this product, do not use any that  
secure parts of the steering or braking systems.  
Otherwise, an accident may result.  
Do not modify this system for use other than that  
specified herein. Also, do not deviate from the  
installation procedures described herein; Eclipse will  
not be held liable for damages including, but not  
limited to serious injury, death or property damage  
resulting from installations that enable unintended  
operation.  
Bundle cables and harnesses with electrical tape or  
wire ties to prevent them from interfering with moving  
parts. If they should entangle with the steering wheel,  
shift lever or brake pedal, an accident may result.  
- -  
3
 
For best results, this product should be installed by a  
professional installer.  
Play the audio at a moderate volume level that  
permits you to hear sounds from outside the vehicle.  
Driving with the inability to not hear outside sounds  
may result in an accident.  
Contact the dealer whom you purchased the product  
for an appointment.  
When installing this product, be sure to use the  
supplied mounting hardware. If parts other than  
those supplied are used, the unit may be damaged  
internally, or may not be held in place securely and  
become dislodged.  
This product must be operated only as on-board  
equipment, or it may cause electrical shock or injury.  
Do not play distorted sounds for long periods of time;  
the speakers may overheat and cause a fire.  
Avoid installing this product in places where it may  
get wet, such as near windows, or in places that are  
moist, damp, or dusty. Presence of liquid, moisture,  
or dust inside this product can cause short circuiting  
resulting in smoke and / or fire.  
Do not cover the ventilation holes or the cooling plate  
of the product. If the ventilation holes or cooling plate  
are covered, heat will build up inside the product and  
fire may result.  
Do not clean the cables or cords with volatile  
chemicals such as alcohol, kerosene, thinner or  
gasoline. Using such chemicals may cause warping,  
discoloration or other damage.  
If this product is not connected properly, a short  
circuit, fire, and / or accident may occur.  
When routing cables, use care so that they do not  
contact sharp metal parts such as brackets or screw  
tips. Otherwise, a short circuit, electric shock, fire and  
/ or accident may result.  
- -  
4
 
Names and functions of terminals  
Never cut the insulation on the power cable or use it to power any other equipment. If the rated current  
capacity of the power cable is exceeded, fire and electric shocks may result.  
The cables should be secured with tape or similar securing method so that they will not cause an  
obstruction while driving. If they get wound or entangled around components such as the steering  
wheel, shifting lever, or brake pedal, accidents may result.  
DECODER UNIT  
1
[ LEFT SIDE ]  
F
E
16P  
INTERCONNECTING CABLE  
2
(Power and speaker connector)  
B
C
1
6
3
D
4
G
5
2
[ RIGHT SIDE ]  
3
INTERCONNECTING  
CABLE  
DECODER UNIT  
1
(Video input connector)  
12P  
Q
M
N
O
J
20P  
K
R
P
L
A
H
4
INTERCONNECTING  
CABLE  
I
(VTR input/output connector)  
Tip  
Refer to page 6 for details on the wire colors and connection points for interconnecting cables  
.
2
Refer to page 6 and 7 for details on connection points  
through  
for the main unit cables  
A
R
and terminals.  
- -  
5
 
Wire colors and connection points for connection cables  
2
Never connect the power supply to the speaker leads (No.5 and No.6),  
otherwise it will cause damage to the main unit.  
Caution  
1
B+ (Yellow)  
Connect where the power is constantly available, regardless of the ignition key's position.  
2
Ground (Black)  
Connect where good body grounding is available.  
3
DVD MUTE wire (Pink)  
If not using  
and , insulate  
Connect to H/A MUTE or DVD MUTE on the main unit.  
3
4
them using PVC tape or similar.  
If they are not insulated, incorrect  
operation may result.  
4
NAVI MUTE wire (Brown)  
Connect to NAVI MUTE on the navigation unit.  
5
Front speaker output leads  
Connect to the front speakers.  
White: Left +  
White/Black:  
Gray/Black:  
Left -  
Right -  
Gray:  
Right +  
6
Rear speaker output leads  
Connect to the rear speakers.  
Green: Left +  
Purple: Right +  
Green/Black:  
Purple/Black:  
Left -  
Right -  
Main unit connectioms  
E-LAN terminal  
A
Connect to the main unit or to a CD changer (sold separately) if one is being used with the system.  
Line-out terminal (Front Mid-Low)  
B
C
D
Connect to the RCA input Connectors of an external  
amplifier.  
Line-out terminal (Front / Front Mid)  
White : Left signal  
Red :  
Right signal  
Line-out terminal (Front Hi)  
The speakers to connect will vary depending on whether the speaker layout is 1-way speaker or  
3-way speaker. (Refer to the instruction manual for details on switching the speaker layout.)  
*
If the speaker layout is "1-way speaker":  
Use the "LINE OUT" (Front/Front/Mid) terminal  
.
C
Terminals  
If the speaker layout is "3-way speaker":  
Connect to the low-range speaker (woofer), connect  
(squawker), and connect to the high-range speaker (tweeter).  
and  
are not used.  
B
D
to the mid-range speaker  
B
C
D
E
Line-out terminal (Rear)  
Connect to the RCA input Connectors of an external amplifier.  
White : Left signal  
Red : Right signal  
- -  
6
 
Center speaker line-out terminal  
F
If using a center speaker (sold separately ), connect it to the RCA input connector of an external  
amplifier.  
Woofer speaker line-out terminal  
G
If using a woofer speaker (sold separately ), connect it here.  
Connect the output cable of external  
VTR input terminals (CH1)  
H
I
video equipment sach as a VTR.  
Yellow : Video signal  
VTR input terminals (CH2)  
White : Audio (left) signal  
Red :  
Audio (right) signal  
Connect to the monitor's video input.  
Yellow : Video signal  
VTR output terminals (CH1)  
VTR output terminals (CH2)  
J
K
L
White : Audio (left) signal  
Red :  
Audio (right) signal  
Video input terminal  
Connect to the AV output terminal of the main unit.  
Yellow : Video signal  
White :  
Red :  
Audio (left) signal  
Audio (right) signal  
NAVI-VOICE input terminal  
M
N
O
Connect to the NAVI sound volume output terminal of the main unit.  
Video output terminal  
Connect to the video input terminal of the main unit.  
Digital input terminal  
Connect to the digital output terminal of the main unit.  
RCA digital input terminal (DIGITAL 1 )  
P
Q
R
Connect to digital output terminal  
of the external unit.  
Optical digital input terminal (DIGITAL 2 )  
MIC terminal 3.5 mm mini-jack  
If measuring frequency response characteristics or carrying out automatic time alignment, connect  
the accessory measuring microphone here.  
- -  
7
 
Speaker connection examples  
If not connecting an external amplifier (sold separately)  
DECODER UNIT  
1
INTERCONNECTING CABLE  
2
(Power and speaker connector)  
Rear speakers  
To center speaker (with amplifier)  
L
R
L
CENTER  
FRONT  
Front speakers  
R
REAR  
SW  
Hi  
M
id  
M
idLow  
To sub-woofer (with amplifier)  
DECODER UNIT  
1
For a front 1-way speaker system  
INTERCONNECTING CABLE  
2
(Power and speaker connector)  
NO CONNECTION  
To center speaker  
(with amplifier) or  
external amplifier  
To external anplifier  
NO CONNECTION  
L
R
L
CENTER  
FRONT  
R
REAR  
SW  
Hi  
M
id  
M
idLow  
To sub-woofer  
(with amplifier) or external  
amplifier  
To external anplifier  
For a front 3-way speaker system  
DECODER UNIT  
1
INTERCONNECTING CABLE  
2
(Power and speaker connector)  
NO CONNECTION  
To center speaker (with amplifier) or external amplifier  
To external anplifier  
To external anplifier  
NO CONNECTION  
L
L
CENTER  
FRONT  
R
R
REAR  
SW  
Hi  
M
id  
M
idLow  
To external anplifier  
To external anplifier  
To sub-woofer (with amplifier) or external amplifier  
- -  
8
 
Installing the decoder unit  
Install the side brackets to the sides of the  
decoder unit with the supplied screws.  
1
2
Hex-head bolt [x4 ]  
7
Attach the self-adhesive pads to the base of the  
side brackets.  
Decoder unit  
1
Side bracket [x2 ]  
5
Life up the carpet underneath the vehicle seat  
and find a suitable mounting location.  
3
Self-ahesive pad [x 2 ]  
6
Make marks on the floor to indicate the bracket  
mounting location.  
4
5
Use a knife to cut slits  
Remove the side brackets from the decoder unit,  
and attach the side brackets to the floor at the  
indicated mounting location.  
Use a knife to cut slits in the carpet at positions  
corresponding to the top of the brackets.  
6
5
SIDE BRACKETS [x 2 ]  
Install the decoder unit to the side brackets.  
7
Decoder unit  
1
Hex-head bolt [x4 ]  
7
- -  
9
 
When measuring frequency response characteristics or carrying out  
automatic time alignment inside the vehicle  
Connect the accessory measuring microphone to  
the decoder unit.  
1
2
Microphone for measuing  
frequency characteristics  
13  
Install the microphone to the headrest of the  
driver's seat.  
Tip  
WIRE  
Using the supplied velcro strap, secure the  
microphone to the base of the headrest.  
Refer to the owners manual of the main unit for  
the correct procedures when taking  
measurements.  
Front of vehicle  
DRIVER'S SEAT  
- -  
10  
 
- -  
11  
 
“ECLIPSE” is a registered trademark of  
FUJITSU TEN LIMITED in 48 countries  
including the U.S. and Japan.  
090003-28580700  
0507DE (CN)  
- -  
12  
 

Edelbrock Automobile Parts 1403 User Manual
ELAN Home Systems Speaker PSP6 User Manual
Extron electronic Network Card DTP T HWP 232 332 D User Manual
Fluke Air Compressor 7350 User Manual
Fostex Network Card PD606 User Manual
Frigidaire Dishwasher FDB2410HI User Manual
FujiFilm Camera Lens YV28X28SR4A SA2 User Manual
Furman Sound Power Supply PS 8 User Manual
GE Microwave Oven 164D2966P147 User Manual
Genz Benz Portable Speaker Intro 90 User Manual