24V DRIVEN, FTP-607 Series
2” HIGH SPEED THERMAL PRINTER
FTP-627MCL353/354 #01 / #02
■ OVERVIEW
The FTP-627 MCL Series are 24V driven high-speed printers
with a 2-inch paper width equivalent.
The FTP-627 MCL Series can be used for a variety of
applications, such as portable terminals, POS, banking
terminals, and measurement and medical equipment.
■ HIGHLIGHTS
• Ultra compact
Height 26.4 mm, width 83.5 mm, depth 43.0 mm
FTP-627MCL354
• High speed printing
It can print at 100 mm/s (800 dotlines/s) maximum by using
Fujitsu's unique head drive control.
• Auto Cutter
Full cut type (#01) and partial cut type (#02) printers are
available.
• Easy paper setting
Our unique platen release mechanism allows a
wide paper route even if the printer is ultra-compact, so
paper can be easily inserted. Conventional auto loading is
also available.
1
FTP-627MCL353/354
■ SPECIFICATIONS
Item
Specification
Interface
Conforms to RS232C / Centronics
24 VDC average current, 1.5A (2.2A peak)
(print ratio: 25%, print speed: 100mm/sec. )
For print head
Power
supply
For motor
For cutter
For logic
24 VDC ± 5%, 1A maximum
5 VDC ± 5%, 1A maximum
5 VDC ± 5%, 0.1 A maximum
83.5 x 43.0 x 26.4 mm (WxDxH)
Approximately 120g
Dimensions Mechanism with cutter
Weight
Mechanism with cutter
Pulse resistance: 50 million pulses/dot (under our standard
conditions); Abrasion resistance: paper traveling distance 50km
(print ratio: 25% or less)
Head
Life
Cutter
300,000 cuts
Operating temperature*
Operating humidity
Storage temperature
Storage humidity
0˚ C to 50˚ C
20 to 85% RH (no condensation)
-20˚ C to +60˚ C (paper not included)
5 to 95% RH (no condensation)
Operating
environment
Head temperature
detection
Detected by thermistor
Detection
function
Paper out/mark detection Detected by photo-interrupter
Platen release
Detected by sliding switch
High Sensitive Paper TF50KS-E4 (Nippon Paper)
Standard paper:
Medium Life Paper
Long Life Paper
TF60KS-E(Nippon Paper), FTP-
020PU001 (58mm), PD105R (Oji Paper),
FTP-020P0701 (58mm)
TF60KS-F1, FTP-020P0102 (58mm),
PD170R (Oji Paper), P220VBB-1
Mitsubishi Paper)
Recommended thermal sensitive paper
PD160R-N (Oji Paper), AFB-235
(Mitsubishi Paper), TP50KJ-R (Nippon
Paper), HA220AA (Nippon Paper)
*+5˚C to +40˚C printing density assurance rance.
3
FTP-627MCL353/354
■ DIMENSIONS
1. Printer mechanism
FTP-627MCL353
FTP-627MCL354
at release
at close
80.5
83.5
1
at release
at close
26.4
1.2
38.6
58 +0
26.4
38.6
(paper width)
-1
3 MAX
3 max.
33.7
(37.2)
(37.2)
Unit: mm
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified).
2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is
open.
4
FTP-627MCL353/354
1. Connector (FPC) specification (CN4)
(1) Connector
Mechanical unit side:
FPC connector
Remote side (housing site):
52610-3090 (made by Molex)
(2) Pin assignment on the mechanical side
Signal
PHK
I/O Contents
No
1
—
—
O
—
O
—
—
—
—
I
Photointerrupter (Cathode)
2
VSEN
PHE
SW
SW
VH
Ground power supply for paper sensor
Photointerrupter (Emittor)
Platen open switch
3
4
5
Platen open switch
6
7
VH
Power supply for thermal head
8
VH
9
NC
Not connected
Clock
10 CLK
11 LAT
12 STB2
13 STB1
14 GND
15 GND
16 GND
17 GND
18 GND
19 GND
20 TH
I
Print data latch
Strobe 2
I
I
Strobe 1
—
—
—
—
—
—
O
—
I
Ground power supply for thermal head
Thermistor
Power for logic
Strobe 3
21 VDD
22 STB3
23 DI
I
Print data in
24 VH
—
—
—
I
25 VH
Power supply for thermal head
Stepping motor excitation signal
26 VH
27 MT/A
28 MT/A
29 MT/B
30 MT/B
I
I
I
5
FTP-627MCL353/354
Sensor (Photo-
interruptor)
Platen unit
Thermal head
Motor
FPC
Connect terminal:
surface side
Connector No
30,29, .....................2,1
(FPC pin numbers)
2. Cutter (CN5)
Connector on control circuit side: B4B-PH-K-S (J.S.T. or equivalent)
No. Signal I/O
Contents
No. Signal I/O
Contents
Cutter position
detect switch
Home position
detect switch
1
3
SW1
M+
-
2
4
SW2
M-
-
Stepping motor
coil excitation
Stepping motor
coil excitation
O
I/O
Europe
Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
Fujitsu Component Limited
Gotanda-Chuo Building
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Fujitsu Components
International
Headquarter
Offices
Asia Pacific
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (1-408) 745-4970
Fax: (65) 6273-3021
Email: [email protected]
Email: [email protected]
© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 11/12/2004.
6
|