Fujitsu Personal Computer Tx200 s3 User Manual

®
System Configuration and Order-information Guide  
TX200 S3  
March 2008  
 
PRIMERGY TX200 S3  
Instruction  
This document contains basic product and configuration information that will enable you  
to configure your system.  
Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete  
PRIMERGY Rack system.  
You can configure your individual PRIMERGY servers in order to meet your specific requirements.  
Please follow the lines. If there is a junction, you can choose which way or component  
you would like to take.  
Go through the configurator by following the lines from the top to the bottom.  
The color of the junction means as follows.  
Key to  
Or  
And  
 
PRIMERGY TX200 S3  
Data Sheet  
Type  
Dual-Processor Tower Server  
PGUT2033A  
Base Unit  
CPU  
Xeon® 5110 (1.60GHz)  
Frequencies  
Quad-Core Intel® Xeon® X5355 (2.66GHz) *6 / E5310 (1.60GHz) *7 /  
Dual-Core Intel® Xeon® 5160 (3GHz) *8 / 5130 (2GHz) *9 / 5110 (1.60GHz)  
Second-Level-Cache  
Multi-Processor  
2x4MB ( Quad-Core Intel® Xeon® X5355 (2.66GHz) / E5310 (1.60GHz) ) /  
4MB ( Dual-Core Intel® Xeon® 5160 (3GHz) / 5130(2GHz) / 5110 (1.60GHz) )  
1 (max. 2)  
Front-Side-Bus  
1333MHz ( Quad-Core Intel® Xeon® X5355 (2.66GHz) / Dual-Core Intel® Xeon® 5160 (3GHz) / 5130 (2GHz) ) /  
1066MHz ( Quad-Core Intel® Xeon® E5310 (1.60GHz) / Dual-Core Intel® Xeon® 5110 (1.60GHz) )  
Chipset  
Memory  
Intel® 5000V  
1GB (512MB ECC DDR2 SDRAM Fully Buffered DIMM x 2, PC2 5300F) (SDDC(Single Device Data Correction) supported)  
Standard  
16GB (ECC DDR2 SDRAM Fully Buffered DIMM, PC2 5300F)  
Maximum *1  
Graphics Controller  
Resolution *2 640x480 dot  
800x600 dot  
incl. Remote Management Controller, VRAM : 1.7MB  
16777216 colors  
16777216 colors  
1024x768 dot  
65536 colors  
1280x1024 dot  
256 colors  
Internal Bays  
3.5 inch  
HDD  
Number of bays  
Available HDD *3  
6 ( 8 by applying Internal HDD Unit Bay Conversion kit (PG-BC103) ) (hot plug)  
73.4GB (PG-HDB75A) 15krpm, SAS  
146.8GB (PG-HDB45A) 15krpm, SAS  
(SAS)  
300.0GB (PG-HDB35A) 15krpm, SAS  
Maximum *3  
1.8TB ( 2.4TB by applying Internal HDD Unit Bay Conversion kit (PG-BC103) ) *10  
3 (2 free bays) ( 1 (0 free bay) by applying Internal HDD Unit Bay Conversion kit (PG-BC103) )  
standard (Max. 24 ATAPI)  
Internal Bays 5inch  
CD-ROM  
PCI Slots  
PCI Express (x8) [x8]  
1
PCI Express (x4) [x8]  
1
PCI-X (64bit/100MHz) [3.3V] *4  
PCI (32bit/33MHz) [5.0V]  
PCI-X (64bit/100MHz) [3.3V]  
2 (1 x Full Size)  
1 (1 x Full Size)  
1 ( SAS Controller occupies one slot. )  
RAID Controller  
SAS Controller  
Internal FDD  
standard (SAS Controller)  
SAS x 8ports (Installed as standard) (with RAID1 function)  
3.5inch (1.44MB/720KB)  
Network Controller (onboard)  
Interfaces  
1 port (1000BASE-T/100BASE-TX/10BASE-T)  
Display (Analog RGB), Serial Port x 2 (D-SUB 9pins), Parallel Port (optional, D-SUB 25pins)  
Keyboard (PS/2type Mini DIN 6pins), Mouse (PS/2type Mini DIN 6pins)  
USB x 5 (ver. 2.0) (Internal : x 2,External : x 3)  
ServerView (Standard)  
Server Management Software  
Remote Service function  
connector  
standard (onboard, Remote Management Controller)  
1 port (100BASE-TX/10BASE-T)  
Power supply Voltage  
AC 100-127V (50/60Hz) / AC 200-240V (50/60Hz) x 1  
( AC 100-127V (50/60Hz) / AC 200-240V (50/60Hz) x 2 when Power Supply Conversion kit (PGBRSU104) is applied. )  
575W / 2070kJ/h (max.)  
Power consumption  
Redundant power supply  
optional (hot plug when Power Supply Conversion kit (PGBRSU104) is applied.)  
optional (hot plug when Power Supply Conversion kit (PGBRSU104) is applied.)  
Tower : 174 (286 incl. protruding parts)(W) x 755 (D) x 474 (H)  
Rackmount ( when Rack Conversion kit for TX200 S3 (PG-R1CK20/PGBR1CK20) is applied.)  
: 483 (W) x 700 (750 incl. protruding parts) (D) x 177 (4U) (H)  
Tower : 38kg (max.) / Rackmount: 40kg (max.)  
Redundant Fan  
Dimensions (mm)  
Weight  
Environmental Conditions  
OS Support *5  
Temperature10-35°C / Humidity 20-80% (non condensing  
Windows Server® 2003 R2, Standard Edition / Windows Server® 2003 R2, Standard Edition (SP2 *11)  
Windows Server® 2003 R2, Enterprise Edition / Windows Server® 2003 R2, Enterprise Edition (SP2 *11)  
Windows Server® 2003, Standard Edition (SP1/SP2 *11) / Windows Server® 2003, Enterprise Edition (SP1/SP2 *11)  
Windows Server® 2003 R2, Standard x64 Edition / Windows Server® 2003 R2, Standard x64 Edition (SP2 *11)  
Windows Server® 2003 R2, Enterprise x64 Edition / Windows Server® 2003 R2, Enterprise x64 Edition (SP2 *11)  
Windows Server® 2003, Standard x64 Edition / Windows Server® 2003, Standard x64 Edition (SP2 *11)  
Windows Server® 2003, Enterprise x64 Edition / Windows Server® 2003, Enterprise x64 Edition (SP2 *11)  
Windows® 2000 Server (SP4) / Windows® 2000 Advanced Server (SP4)  
Red Hat Enterprise Linux AS (v.3 for x86) *12 *13 / Red Hat Enterprise Linux ES (v.3 for x86) *12 *13  
Red Hat Enterprise Linux AS (v.4 for x86) *12 / Red Hat Enterprise Linux ES (v.4 for x86) *12  
Red Hat Enterprise Linux AS (v.4 for EM64T) *12 / Red Hat Enterprise Linux ES (v.4 for EM64T) *12  
Red Hat Enterprise Linux 5 (for x86) *12 *14 / Red Hat Enterprise Linux 5 (for Intel64) *12 *14  
ServerStart (Setup Support tool) *15  
Attached tool (Standard)  
*1. Available memory capacity will be changed by the type of OS. Please find more details in Notes[Memory OS Compatibility List].  
*2. Resolution is determined by functions of the display monitor and OS.  
*3. HDD capacity is calculated according to the formulas 1GB=1000 3 byte and 1TB=10004 byte.  
*4. Frequency will be changed by the spec of PCI card and number of cards mounted.  
*5. Drivers for Linux are not attached. Please download and use drivers of the following URL.  
*6. CPU Conversion kit: Xeon 5110(1.60GHz/4MB) -> Xeon X5355(2.66GHz/2x4MB) (PGBFU405) is available for upgrading to Quad-Core Intel® Xeon® X5355 2.66GHz.  
*7. CPU Conversion kit: Xeon 5110(1.60GHz/4MB) -> Xeon E5310(1.60GHz/2x4MB) (PGBFU403) is available for upgrading to Quad-Core Intel® Xeon® E5310 1.60GHz.  
*8. CPU Conversion kit: Xeon 5110(1.60GHz/4MB) -> Xeon 5160(3GHz/4MB) (PGBFU30T2) is available for upgrading to Dual-Core Intel® Xeon® 5160 3GHz.  
*9. CPU Conversion kit: Xeon 5110(1.60GHz/4MB) -> Xeon 5130(2GHz/4MB) (PGBFU30S2) is available for upgrading to Dual-Core Intel® Xeon® 5130 2GHz.  
*10. In case that SAS Controller installed as standard is used for RAID configuration, only 2 HDDs of same capacity and same rpm can be connected.  
*11. There are some notes for Windows 2003 SP2. Please refer to Notes of Support Matrix.  
*12. Regarding supported kernel versions of Linux, please refer to the following list.  
*13. Quad-Core Intel® Xeon® X5355 (2.66GHz) / E5310 (1.60GHz) are not included.  
*14. Total number of cores of CPU(s) should be four or more for using VM (Virtual Machine) function.  
*15. ServerStart doesn't support Linux.  
*. Noise level is 37dB. ( Noise level is 47dB when Power Supply Conversion kit (PGBRSU104) is applied. )  
 
PRIMERGY TX200 S3  
Configuration Diagram  
Power Supply Unit  
Power Supply Unit  
CPU  
Xeon®  
X5355 (2.66GHz)/  
E5310 (1.60GHz)/  
5160 (3GHz)/  
When Internal HDD Unit Bay Conversion kit (PG-  
BC103) is applied. ( HDD x 2ports )  
Internal Backup Device cannot be mounted  
because 5inch Bay x 2 is used by HDDs.  
*2  
5 inch Bay 3  
5 inch Bay 2  
*1  
5 inch Bay 1  
CD-ROM Drive / FDD  
5130 (2GHz)/  
5110 (1.60GHz)  
Bay 8  
SAS  
Memory  
Xeon®  
DIMM Slot 3B  
DIMM Slot 2B  
DIMM Slot 1B  
DIMM Slot 3A  
DIMM Slot 2A  
DIMM Slot 1A  
X5355 (2.66GHz)/  
E5310 (1.60GHz)/  
5160 (3GHz)/  
5130 (2GHz)/  
5110 (1.60GHz)  
Bay 7  
SAS  
3.5 inch HDD Bay 6  
(hot plug)  
Hard Disk 3.5inch Bay (hot plug)  
Standard Drive Cage ( HDD x 6ports )  
3.5 inch HDD Bay 5  
(hot plug)  
PCI Slots  
3.5 inch HDD Bay 4  
(hot plug)  
Bay 6  
SAS  
PCI5 PCI 32bit/33MHz  
PCI4 PCI Express (x4)  
PCI3 PCI Express (x8)  
3.5 inch HDD Bay 3  
(hot plug)  
Bay 5  
SAS  
3.5 inch HDD Bay 2  
(hot plug)  
PCI2 PCI-X 64bit/100MHz *3  
PCI1 PCI-X 64bit/100MHz *3  
PCI10 PCI-X 64bit/100MHz  
3.5 inch HDD Bay 1  
(hot plug)  
Bay 4  
SAS  
Bay 3  
SAS  
*1. By applying Internal HDD Unit Bay Conversion kit (PG-BC103), 5 inch bay x 2 can be converted  
to 3.5 inch bay x 2.  
When Internal HDD Unit Bay Conversion kit (PG-BC103) is applied, Internal Backup Device  
cannot be mounted on 5inch Bay.  
Bay 2  
SAS  
*2. By applying Power Supply Conversion kit (PGBRSU104), non-redundant structure (Power Supply x1,  
FAN x2) can be converted to redundant structure (Power Supply x2, FAN x6).  
*3. Frequency will be changed by the spec of PCI card and number of cards mounted.  
Bay 1  
SAS  
*Components installed as standard configuration marked in grey.  
Mountable I/O Options  
PCI Slot  
10  
1
2
3
4
5
PCI-X  
PCI Express  
PCI  
Mount  
Priority  
Max No.  
of Mount  
Mountable Cards  
Bus  
Remarks  
64bit/  
100MHz  
64bit/  
100MHz *1  
x8  
x4  
32bit/  
33MHz  
lane  
lane  
Full Height  
x8 socket  
3.3V  
5.0V  
-
SAS Controller  
(8ports)  
-
PCI-X/64bit  
PCI-X/64bit  
PCI-X/64bit  
PCI-X/64bit  
PCI/32bit  
#
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1
1
Standard, Internal array  
Internal array  
High  
PG-140F /  
PGB140F  
SAS RAID Ctrl  
[1]  
[1]  
[1]  
[1]  
[1]  
[1]  
[2]  
[2]  
-
-
-
1
1
2
2
2
2
PG-140G /  
PGB140G  
SAS RAID Ctrl  
-
-
-
Internal array  
PG-1892 /  
PGB1892  
Eth. Ctrl 1000-BASE-T Cu  
[2]  
[2]  
[2]  
[2]  
[1]  
[1]  
-
-
-
[3]  
[3]  
[3]  
[3]  
[3]  
[3]  
-
Eth. Ctrl 1x1Gbit PCI  
1000-BASE-T  
PG-1853 /  
PGB1853  
* No AFT/ALB Support  
-
-
2
3
Eth. Ctrl 1000-BASE-SX  
Fibre LC  
PG-1882  
PG-1863  
PCI-X/64bit  
PCI-X/64bit  
PCI/64bit  
-
-
Eth. Ctrl 2x1Gbit PCI-X  
1000-BASE-T  
-
-
RAID Ctrl 2-Channel 128MB PG-142E3 /  
w/ BBU  
-
-
2
2
2
2
2
2
External array  
PGB142E3  
Low  
PG-1281 /  
PGB1281  
Internal/External SCSI  
Controller  
SCSI Ctrl U160  
PCI/64bit  
-
-
PG-FC202 /  
PGBFC202  
PCI Express  
(x4)  
Fibre Channel Controller  
[1]  
[1]  
[1]  
[1]  
[2]  
[2]  
[2]  
[2]  
PCI Express Card  
PCI Express Card  
PCI Express Card  
PCI Express Card  
High  
Eth. Ctrl 2x1Gbit PCI-E  
1000-BASE-T  
PG-2861 /  
PGB2861  
PCI Express  
(x4)  
-
-
-
Eth. Ctrl 1x1Gbit PCI-E  
1000-BASE-T  
PG-289 /  
PGB289  
PCI Express  
(x1)  
-
-
-
Low Eth. Ctrl 1x1Gbit PCI-E  
1000BASE-SX  
PCI Express  
(x4)  
PG-288  
-
-
-
* [n] : Installation Priority  
* # : standard  
* - : cannot be installed  
*1.Frequency will be changed by the spec of PCI card and number of cards mounted.  
 
PRIMERGY TX200 S3  
Connection Table  
Form factor conversion  
(Tower to Rackmount)  
Rack Conversion kit for TX200 S3  
(Tower to Rackmount (4U))  
PG-R1CK20  
PGBR1CK20 (for CTO)  
CPU  
Max: 2 CPU  
Processor Xeon X5355 2.66GHz/2x4MB  
PG-FG405  
CPU  
Slot  
PGBFG405 (for CTO)  
*. This option is available when CPU Conversion Kit:  
Xeon 5110(1.60GHz/4MB) -> Xeon X5355(2.66GHz/2x4MB) (PGBFU405) is applied.  
Processor Xeon E5310 1.60GHz/2x4MB  
PG-FG403  
PGBFG403 (for CTO)  
*. This option is available when CPU Conversion Kit:  
Xeon 5110(1.60GHz/4MB) -> Xeon E5310(1.60GHz/2x4MB) (PGBFU403) is applied.  
Processor Xeon 5160 3GHz/4MB  
PG-FG30T  
PGBFG30T (for CTO)  
*. This option is available when CPU Conversion Kit:  
Xeon 5110(1.60GHz/4MB) -> Xeon 5160(3GHz/4MB) (PGBFU30T2) is applied.  
Processor Xeon 5130 2GHz/4MB  
PG-FG30S  
PGBFG30S (for CTO)  
*. This option is available when CPU Conversion Kit:  
Xeon 5110(1.60GHz/4MB) -> Xeon 5130(2GHz/4MB) (PGBFU30S2) is applied.  
Processor Xeon 5110 1.60GHz/4MB  
PG-FG30R  
PGBFG30R (for CTO)  
*. This option is available when the processor of the base unit  
is Processor Xeon 5110(1.60GHz/4MB).  
*CPU Conversion Kit (available only as a Configure To Order (CTO) option; no separate shipment is possible)  
Type  
Product ID  
PGBFU405  
CPU Conversion Kit:  
Xeon 5110(1.60GHz/4MB)  
-> Xeon X5355(2.66GHz/2x4MB)  
(for CTO)  
Dual-Core Intel® Xeon® 5110(1.60GHz/4MB) -> Quad-Core Intel® Xeon® X5355(2.66GHz/2x4MB)  
Convert the CPU installed as standard in the base unit to the other.  
(Note: This option can be ordered only as coupled with the base unit.  
A separate shipment is not possible.)  
CPU Conversion Kit:  
Xeon 5110(1.60GHz/4MB)  
-> Xeon E5310(1.60GHz/2x4MB)  
(for CTO)  
Dual-Core Intel® Xeon® 5110(1.60GHz/4MB) -> Quad-Core Intel® Xeon® E5310(1.60GHz/2x4MB)  
Convert the CPU installed as standard in the base unit to the other.  
(Note: This option can be ordered only as coupled with the base unit.  
A separate shipment is not possible.)  
PGBFU403  
PGBFU30T2  
PGBFU30S2  
CPU Conversion Kit:  
Xeon 5110(1.60GHz/4MB)  
-> Xeon 5160(3GHz/4MB)  
(for CTO)  
Dual-Core Intel® Xeon® 5110(1.60GHz/4MB) -> Dual-Core Intel® Xeon 5160(3GHz/4MB)  
Convert the CPU installed as standard in the base unit to the other.  
(Note: This option can be ordered only as coupled with the base unit.  
A separate shipment is not possible.)  
CPU Conversion Kit:  
Xeon 5110(1.60GHz/4MB)  
-> Xeon 5130(2GHz/4MB)  
(for CTO)  
Dual-Core Intel® Xeon® 5110(1.60GHz/4MB) -> Dual-Core Intel® Xeon® Xeon 5130(2GHz/4MB)  
Convert the CPU installed as standard in the base unit to the other.  
(Note: This option can be ordered only as coupled with the base unit.  
A separate shipment is not possible.)  
 
PRIMERGY TX200 S3  
Memory (PC2 5300F)  
Max: 16GB  
Memory  
Slot  
Memory Module-1GB (512MB FB-DIMM x 2)  
PG-RM1CE  
Standard Memory Module: 1GB (512MB FB-DIMM x 2)  
Memory Module-2GB (1GB FB-DIMM x 2)  
PG-RM2CE  
Memory Module-4GB (2GB FB-DIMM x 2)  
PG-RM4CE  
Memory Module-8GB (4GB FB-DIMM x 2)  
PG-RM8CE  
Memory Module Conversion kit (for CTO)  
Memory  
Slot  
Memory Module Conversion kit-2GB (1GB FB-DIMM x 2)  
PGBRU2CE (for CTO)  
1GB -> 2GB  
1GB -> 4GB  
Memory Module Conversion kit-4GB (2GB FB-DIMM x 2)  
PGBRU4CE (for CTO)  
* Notes on installing memory  
1. Memory is installed by pairs of FB-DIMMs of the same capacity. Installation of one FB-DIMM or a mixed -capacity pair is impossible.  
2. The memory capacities of the slots should be in ascending order in the following sequence:  
DIMM slots 1A,1B (Bank 1) -> DIMM slots 2A,2B (Bank 2) -> DIMM slots 3A,3B (Bank 3)  
(Available Memory Area)  
Mounted Memory  
Available Memory Area  
~3.0GB  
4.0GB  
Same as the size of mounted memory  
Size of Mounted Memory minus "1.0GB"  
Same as the size of mounted memory  
Size of Mounted Memory minus "1.0GB"  
Same as the size of mounted memory  
Windows® 2000 Server (SP4)  
~7.0GB  
8.0GB  
Windows® 2000 Advanced  
Server (SP4)  
Others  
~16.0GB  
*. Spare Memory function  
In the case of using Spare Memory function, same DIMMs of two or more banks are required to be installed.  
Available memory capacity is "installed memory" minus "capacity of Spare Memory ( 1 Bank )".  
 
PRIMERGY TX200 S3  
Connecting Internal HDD and Internal Backup Devices  
If you would like to order internal HDDs and internal backup devices, please order optional cards/cables according to the following table.  
Type of HDD connection  
Internal Backup Devices PRIMERGY TX200 S3  
Connection  
Drive Cage  
Standard Drive Cage  
(6bays)  
Interface  
USB (''1) Connection  
SCSI Wide (''2) Connection  
SAS Controller (standard)  
*. In case that SAS Controller installed as standard  
is used for RAID configuration, only 2 HDDs of same  
capacity and same rpm can be connected.  
Onboard USB  
(internal port)  
SCSI Card (PG-1281/PGB1281)  
SCSI Cable (PG-CBLS025) (''3)  
SAS /  
RAID  
When Internal HDD Unit Bay  
Conversion kit (PG-BC103) is  
applied. (+2bays)  
SAS Controller (standard)  
*. Only SAS Configuration is supported.  
-
-
(not connect)  
(not connect)  
Standard Drive Cage  
(6bays)  
SAS RAID Ctrl (PG-140F/PG-140G)  
( SAS Controller (standard) )  
Onboard USB  
(internal port)  
SCSI Card (PG-1281/PGB1281)  
SCSI Cable (PG-CBLS025) (''3)  
RAID  
When Internal HDD Unit Bay  
Conversion kit (PG-BC103) is  
applied. (+2bays)  
SAS RAID Ctrl (PG-140F/PG-140G)  
( SAS Controller (standard) )  
-
-
(not connect)  
(not connect)  
(''1) USB Backup Devices: PG-DT504  
(''2) SCSI Wide Backup Devices: PG-LT302/PG-LT201/PGBLT201C1/PG-LT102  
(''3) If you order internal backup devices by CTO, SCSI cable is attached with backup devices.  
Internal HDD  
SAS / RAID Configuration  
HDD SAS 15k 73GB hot plug 3.5inch  
PG-HDB75A  
PCI Bus  
SAS Controller  
( installed as standard )  
PGBHDB75A (for CTO)  
*. In case that SAS Controller installed  
as standard is used for RAID configuration,  
only 2 HDDs of same capacity and same  
rpm can be connected.  
HDD SAS 15k 147GB hot plug 3.5inch  
PG-HDB45A  
Internal HDD Unit Bay  
Conversion kit  
PGBHDB45A (for CTO)  
*. RAID1 configuration can be set.  
*. Hot spare disk cannot be set.  
PG-BC103  
HDD SAS 15k 300GB hot plug 3.5inch  
PG-HDB35A  
RAID Configuration  
PGBHDB35A (for CTO)  
PCI Bus  
*. When Internal HDD Unit Bay Conversion kit  
(PG-BC103) is applied, up to 8 Internal HDDs  
can be mounted but internal backup devices  
cannot be mounted on 5inch Bays.  
SAS RAID Ctrl  
(without BBU)  
PG-140F  
PGB140F (for CTO)  
*. RAID 0/1/5/1+0 configuration can be set.  
To set RAID configuration, two or more HDDs  
which are same capacity and same rpm  
should be connected to SAS Controller  
installed as standard.  
SAS RAID Ctrl  
(with BBU)  
PG-140G  
PGB140G (for CTO)  
*. RAID 0/1/5/1+0 configuration can be set.  
To set RAID configuration, two or more HDDs  
which are same capacity and same rpm  
should be connected to SAS Controller  
installed as standard.  
 
PRIMERGY TX200 S3  
Internal backup device  
Tape Drv LTO3 Ultrium3/Ultrium2 400GB  
PG-LT302  
( In case that internal backup device is ordered by CTO. )  
*. One SCSI cable is attached with backup device ordered  
PCI Bus  
Tape Drv LTO3 Ultrium3/Ultrium2 400GB  
SCSI Ctrl U160  
PG-1281  
by CTO and can be connected to multiple backup devices.  
*. One internal backup device can be ordered by CTO.  
w/ SCSI Cable  
PGBLT302C (for CTO)  
*. One internal backup device can  
be ordered by CTO.  
PGB1281 (for CTO)  
( In case that internal backup device is ordered without CTO. )  
Tape Drv LTO2 Ultrium2 200GB  
PG-LT201  
Tape Drv LTO2 Ultrium2 200GB  
w/ SCSI Cable  
SCSI Cable 1.7m  
PGBLT201C1 (for CTO)  
*. One internal backup device can  
be ordered by CTO.  
PG-CBLS025  
*. One SCSI cable can be connected to multiple backup devices.  
Tape Drv LTO Ultrium1 100GB  
PG-LT102  
*. In case that internal backup device is ordered by CTO,  
SCSI Ctrl U160 (PGB1281) should be ordered too.  
*. One internal backup device can be ordered by CTO.  
*. When internal HDD Unit Bay Coversion kit (PG-BC103) is applied,  
internal backup devices can not be mounted on 5 inch bays.  
Tape Drv LTO Ultrium1 100GB  
w/ SCSI Cable  
2 slots / Max: 2  
PGBLT102C (for CTO)  
*. One internal backup device can  
be ordered by CTO.  
Internal backup device (USB)  
Tape Drv DAT72 36GB internal  
PG-DT504  
USB Interface  
(internal)  
PGBDT504 (for CTO)  
*. One internal backup device can  
be mounted.  
*. One internal backup device(USB) can be ordered by CTO.  
*. When internal HDD Unit Bay Coversion kit (PG-BC103) is applied,  
internal backup devices can not be mounted on 5 inch bays.  
Internal DVD-RAM  
Onboard IDE  
Controller  
DVD-RAM Conversion kit (CD-ROM Drive -> DVD-RAM Drive)  
PGBDVAU104 (for CTO)  
Internal backup device (PRIMERGY SX10)  
*PRIMERGY SX10 is available for rack install type.  
PCI Bus  
SCSI Ctrl U160  
PG-1281  
SCSI Cable HDCI 1.5m  
PG-CBLS001  
PRIMERGY SX10  
PG-R1BC4  
PGB1281 (for CTO)  
SCSI Cable HDCI 5m  
PG-CBLS002  
*Please find more information on the internal backup devices for PRIMERGY SX10  
in Rackmount[Internal Backup Devices with PRIMERGY SX10 ]  
Power Supply Units/ Fan (CTO only)  
Power Supply Slot/ Fan  
Power Supply Conversion kit  
PGBRSU104 (for CTO)  
( non-redundant structure (Power Supply x1, FAN x2)  
-> redundant structure (Power Supply x2, FAN x6) )  
 
PRIMERGY TX200 S3  
LAN Card (Standard PCI Slot)  
On-board LAN  
Eth. Ctrl 2x1Gbit PCI-E 1000-BASE-T  
PG-2861  
PCI Express Bus  
Twist Pair Cable ( Category 5e)  
PGB2861 (for CTO)  
* Dual Port  
Eth. Ctrl 1x1Gbit PCI-E 1000-BASE-T  
PG-289  
PGB289 (for CTO)  
Eth. Ctrl 1x1Gbit PCI-E 1000BASE-SX  
PG-288  
Multi Mode Fibre Channel Cable  
Twist Pair Cable ( Category 5e)  
Eth. Ctrl 2x1Gbit PCI-X 1000-BASE-T  
PCI Bus  
PG-1863  
* Dual Port  
Eth. Ctrl 1000-BASE-T Cu  
PG-1892  
PGB1892 (for CTO)  
Eth. Ctrl 1x1Gbit PCI 1000-BASE-T  
PG-1853  
PGB1853 (for CTO)  
* No AFT/ALB Support  
Eth. Ctrl 1000-BASE-SX Fibre LC  
PG-1882  
Multi Mode Fibre Channel Cable  
Server Management (Remote Management Controller)  
LAN interface for Remote  
Management Controller  
Twist Pair Cable ( Category 5e)  
Remote Management Ctrl Upgrade kit  
PG-RMCU1  
Parallel Port Option  
Back-side Panel  
Parallel Port Option  
PG-PP04  
Specifications are subject to change without notice. For the latest detailed information, contact your local representative.  
All brand names and product names are trademarks and registered trademarks of their respective holders.  
©2006 Fujitsu Limited. All rights reserved. Printed in Japan.  
Global Business Development & Marketing  
Business Strategy & Planning  
System Products  
 

Dyson Vacuum Cleaner DC14 User Manual
EAW Speaker System Weather Protected Loudspeaker System User Manual
Estate Range TGS325 User Manual
Extron electronic TV Mount WMK 100 User Manual
Fagor America Clothes Dryer SFA 8CELX User Manual
Fisher Price Baby Toy B0004 User Manual
Genelec Speaker 7060B User Manual
Generac Power Systems Portable Generator 68L User Manual
Gitzo Camcorder Accessories G1504 User Manual
Gitzo Camcorder Accessories GM2560T User Manual