Extron electronic Clock CLK 100 User Manual

Quick Start — CLK 100  
The Extron CLK 100 is a versatile, battery-operated LCD  
Hour/Day — Press the Hour/Day button to toggle  
clock with an integrated thermometer, ideal for  
monitoring the ambient temperature within an  
equipment rack or room. The CLK 100 is equally at  
home in desktop or shelf top applications.  
between time and date.  
Reset — Press the red Reset button to reset all displays  
to default values.  
Accessing these buttons may require  
opening the enclosure. To open the  
enclosure unscrew the four side panel  
screws.  
Features  
Alternately displays the current time and date.  
Time is displayed in either a 12- or 24-hour time  
scheme.  
Measures temperature in one minute intervals.  
Temperature is displayed in Celsius or Fahrenheit.  
The displayed temperature ranges from  
-9° C to 50 °C or 16 °F to 122 °F. If this range is  
exceeded, the temperature display flashes.  
Installing the Battery  
1. Remove the battery cover and install one AAA,  
1.5 V battery.  
Setting the Display  
1. To change the display, press the Set button; the  
flashing letters or numbers can be changed. Use the  
Up or Down buttons to change the value.  
2. Align the battery with the diagram inside the  
battery compartment.  
3. Replace the battery cover.  
2. To move to the next display, press the Set button  
again. Continue until the Year, Month, Day, Hour,  
and Minute displays are set.  
Installing the battery requires opening the  
enclosure. To open the enclosure unscrew  
the four side panel screws.  
3. To return to normal time/date mode, press the Set  
button again.  
Buttons  
Mode — Toggle between 12- or 24-hour time schemes.  
Accessing display buttons may require  
opening the enclosure. To open the  
enclosure unscrew the four side panel  
screws.  
Set — Press the Set button to enter setup mode. When  
changing display values, use the Set button to  
advance to the next display.  
Up (Time/Date toggle) — When adjusting the CLK 100  
display, press the Up button to increase display  
value.  
Mounting Instructions  
The CLK 100 can be used as a stand alone clock or  
mounted in an Extron 1U Universal Rack Shelf, as  
shown below.  
Once the CLK 100 is configured, press UP to turn off  
the automatic toggle between time and date.  
Down (°C/°F) — When adjusting the CLK 100 display,  
press the Down button to decrease display value.  
In normal mode, press the Down button to toggle  
between Centigrade or Fahrenheit temperature  
displays.  
MODE  
SET  
UP  
DOWN HOUR/DAY RESET  
68-1183-01  
Rev B  
10-05  
CLK 100 • Quick Start QS-1  
 

Edifier Enterprises Canada Speaker System R501 User Manual
Ei Electronics Smoke Alarm Ei 100R User Manual
Extron electronic Projector Accessories PMK 450 User Manual
Fisher Paykel Oven OB30 User Manual
Frigidaire Air Conditioner FRS224YS1 User Manual
Frigidaire Microwave Oven 316495063 User Manual
FujiFilm Camcorder F300EXR User Manual
GE Answering Machine 00003287 User Manual
Giant Saw Triplex Ceramic Plunger Pump User Manual
Global Machinery Company Cordless Drill DP250LS User Manual