VICTOR SERIES ALUMINUM WATER PUMPS
For 1965-68 289 c.i.d., 1968-69 302 c.i.d. and 1969 351-W Ford V8s
Catalog #8841 (unpolished), #8846 (polished)
GENERAL INSTRUCTIONS
PLEASE study these instructions carefully before installing
• INSTALLATION
your new water pump. If you have any questions or problems,
do not hesitate to contact our Technical Hotline at:
1-800-416-8628.
Installation is the same as for original equipment water pumps.
Consult service manual for specific procedures, if necessary.
CAUTION: Be sure that fan bolts don't protrude through the
hub so far that they hit the water pump housing.
• NOTE: Check clearance between water pump body and
crankshaft dampner. Clearance pump body or change dampner
if necessary.
• DESCRIPTION
The Edelbrock aluminum water pump #8841 is a heavy duty
water pump for both street and racing applications. The pump is
a direct replacement for the original equipment pump (Ford
#C5AZ-8501-H) to provide compatibility with all accessories
and pulleys. It offers weight savings along with increased dura-
bility and cooling potential. #8841 is a standard rotation water
pump for 289, 302 and 351-W engines. Not for reverse rotation
1986-93 5.0 Litre V8s with serpentine drive belt.
Polished Aluminum Water Pump #8846 fits the same applica-
tions as #8841.
• SPECIAL NOTES:
Check closely for any interference with drive belts; some filing
for clearance may be necessary with some applications.
• SPECIFICATIONS
Dimension from flange surface to hub:
#8841—
5.4"
• PLEASE complete and mail your warranty card. Be sure to write the model number of this product in the “Part #____” space.
• THANK YOU.
©1994 Edelbrock Corp.
11/94
VICTOR SERIES ALUMINUM WATER PUMPS
For 1965-68 289 c.i.d., 1968-69 302 c.i.d. and 1969 351-W Ford V8s
Catalog #8841 (unpolished), #8846 (polished)
GENERAL INSTRUCTIONS
PLEASE study these instructions carefully before installing
• INSTALLATION
your new water pump. If you have any questions or problems,
do not hesitate to contact our Technical Hotline at:
1-800-416-8628.
Installation is the same as for original equipment water pumps.
Consult service manual for specific procedures, if necessary.
CAUTION: Be sure that fan bolts don't protrude through the
hub so far that they hit the water pump housing.
• NOTE: Check clearance between water pump body and
crankshaft dampner. Clearance pump body or change dampner
if necessary.
• DESCRIPTION
The Edelbrock aluminum water pump #8841 is a heavy duty
water pump for both street and racing applications. The pump is
a direct replacement for the original equipment pump (Ford
#C5AZ-8501-H) to provide compatibility with all accessories
and pulleys. It offers weight savings along with increased dura-
bility and cooling potential. #8841 is a standard rotation water
pump for 289, 302 and 351-W engines. Not for reverse rotation
1986-93 5.0 Litre V8s with serpentine drive belt.
Polished Aluminum Water Pump #8846 fits the same applica-
tions as #8841.
• SPECIAL NOTES:
Check closely for any interference with drive belts; some filing
for clearance may be necessary with some applications.
• SPECIFICATIONS
Dimension from flange surface to hub:
#8841—
5.4"
• PLEASE complete and mail your warranty card. Be sure to write the model number of this product in the “Part #____” space.
• THANK YOU.
©1994 Edelbrock Corp.
11/94
|
EdgeStar Beverage Dispenser TBC50S User Manual
Electro Voice Microphone 633 User Manual
EverFocus Digital Camera 550EX User Manual
Everpure Plumbing Product EV9008 20 User Manual
Extron electronic Switch System 7SC User Manual
Fisher Paykel Washer WL26C User Manual
Fisher Price Bicycle J5242 User Manual
Fisher Price Musical Table B9001 User Manual
Fujitsu Scanner M3093EX User Manual
GE Monogram Oven ZGU48L6RDSS User Manual