Extron electronic Network Card HSA 200S Series User Manual

hideAwAy® surfAce Access enclosures  
®
Hideaway HSA 200S Series  
Compact, Fixed Configuration, Tilt-Up HSA - Hideaway Surface Access Enclosures with Square Bezel  
CoMMon features  
Durable pneumatic movement and mechanical latching mechanism  
HSA 200SE includes built-in Extender video and audio line driver  
Top surface available in black anodized or brushed aluminum finishes  
One female 15-pin HD connector and 3.5 mm mini stereo audio jack  
Two CAT 6 RJ-45 network/data/phone connectors; unswitched AC outlet  
The HSA 200S and HSA 200SE include an RJ-45 connection kit for each front panel RJ-45 jack.  
Inside the kit, there is one set of icons for labeling, one blank hole filler, and an assortment of  
colored bezels. This offers the option of labeling and color-coding the RJ-45 connectors as they  
pertain to their assigned function, or covering the connector when it is not needed. The Hideaway  
HSA 200S and HSA 200SE ship standard in black anodized or brushed aluminum finish.*  
Versions are available with discrete US, Australia, UK, Central Europe, Switzerland, France,  
Israel, or India power outlets, as well as a universal receptacle ideal for use in hotels and  
conference centers.  
Versions available with US, Australia, UK, Central Europe, Switzerland, France,  
Israel, or India power outlets  
Available Universal AC power receptacle accepts US, UK, Israel, Central  
Europe, France, Australia, India, Swiss, Italy, and Denmark AC plug types  
*Polished aluminum finish and brushed brass finish are also available. These models are built to order and  
require a longer lead time. Call an Extron Customer Support Representative for more information.  
UL/CUL listed and CE compliant  
Installation routing template available upon request  
Brushed brass and polished aluminum finishes available by special order,  
requires 11-14 week lead time  
desCriPtion  
Extron  
HSA 200S  
The Extron Hideaway HSA 200S and HSA 200SE provide compact, tilt-up, architectural  
solutions for inconspicuous computer-video interface connector access. The HSA 200SE  
provides a built-in Extron Extender line driver, which allows computer video signals to be output  
on five BNC pigtails and driven over long cable runs without degradation of the signal. The  
Extender also converts unbalanced audio to a balanced signal.  
Hideaway Surface  
Access Enclosure  
with Extender  
Line Driver  
The HSA 200S and HSA 200SE square bezel enclosures are designed for easy mounting  
into virtually any table surface and are ergonomically designed, keeping installation time and  
effort at a minimum. Once installed, the HSA 200S and HSA 200SE products fit flush with the  
tabletop, storing connectors out of sight. To access the connectors, users press down on the  
top of the enclosure. Pressing down releases a mechanical latch and the HSA slowly pivots into  
view, presenting the connectors at an ergonomic 49-degree angle to the tabletop.  
Mounted  
through a table  
or lectern  
Both models offer one female 15-pin HD connector, one unswitched AC outlet, two  
bezel-mounted CAT 6 RJ-45 network/data/phone connectors, and audio on 3.5 mm stereo  
jack connectors on its faceplate.  
Continued  
144  
USA West  
USA East  
© 2008 Extron Electronics. All rights reserved.  
Pricing and specifications may change without notice.  
+1.714.491.1500 / +800.633.9876  
+1.714.491.1517 FAX  
+1.919.863.1794 / +800.633.9876  
+1.919.863.1797 FAX  
 
hideAwAy® surfAce Access enclosures  
®
Hideaway HSA 200S Series  
®
Hideaway HSA 200C Series Accessories  
routinG teMPlates  
Model desCriPtion  
PaGe  
Part #  
HSA 200/222 and Cable Cubby 300S/300C  
Routing Template: US Template  
HSA 200/222 Routing Template  
HSA 200/222 US Routing Template. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . n/a  
HSA 200/222 International Routing Template. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . n/a  
70-237-01  
70-237-02  
oPtional aCCessories  
Model desCriPtion  
PaGe  
Part #  
HSA 200 RJ-11 Cable Kit  
For HSA - Hideaway Surface Access Enclosures - HSA 200 Kit . . . . . . . . . . . . . . . . . . n/a  
70-231-01  
70-229-01  
Flexible Conduit Adapter Kit For HSA 200/222 Installation Kit for Hard Wired Electrical Environments - HSA 200/222. . . . . . . . . . page 140  
General  
sPeCifiCations  
Power (HSA 200SE).............. Supplied by an external power supply  
video  
Hsa 200se  
External power supply: 100 VAC to 240 VAC, 50/60 Hz, external,  
autoswitchable; to 12 VDC, 0.42 A, regulated  
Power input requirements: 12 VDC, 0.2 A  
Gain................................ Selectable: unity (0.7 V), (0.75 V) 50%, (0.8 V) 100%  
Bandwidth ........................ 300 MHz (-3 dB)  
NOTE: ID bits are terminated on pins 4 and 11.  
Temperature / Humidity  
(
HSA 200SE)....................... Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing  
video inPut  
Hsa 200s  
Operating: +3° to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing  
Number / Signal type........... 1 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs  
Connectors ....................... (1) 15-pin HD female  
Rack mount ...................... No, but furniture mountable  
Enclosure type................... Metal  
Enclosure dimensions  
video inPut  
Hsa 200se  
CAUTION: Use the appropriate metal Extron routing template or refer to the surface cutout dimensions here before cutting a  
hole in the furniture or other surface. Pay special attention to the direction the unit will face; the unit’s connector access side  
is underlined. Extron is not responsible for miscut mounting holes.  
Number / Signal type........... 1 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs  
Connectors ....................... (1) 15-pin HD female  
Nominal level .................... 0.7 Vp-p for RGB  
Minimum / Maximum levels... Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain  
Impedance........................ 75 ohms  
Horizontal frequency............ 15 kHz to 135 kHz  
Vertical frequency............... 30 Hz to 170 Hz  
USA models  
Top plate (outer rim) .............. 6.470" W x 5.125" D (16.43 cm W x 13.02 cm D)  
Surface cutout (inside rim)....... 5.970 0.0325" W x 4.625 0.0325" D  
(15.16 0.083 cm W x 11.75 0.083 cm D)  
Top plate (inside tilt plate)........ 4.344" W x 3.000" D (11.03 cm W x 7.62 cm D)  
Box (under surface)............... 4.0" H x 4.6" W (front of unit) x 4.4" D  
(10.2 cm H x 11.7 cm W x 11.2 cm D) without clamps  
4.0" H x 8.0" W (front of unit) x 4.4" D  
video outPut  
Hsa 200s  
Number / Signal type........... 1 pass-through VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs  
Connectors ....................... 5 BNC female on pigtails  
(10.2 cm H x 20.3 cm W x 11.2 cm D) with clamps  
International models  
Top plate (outer rim) .............. 8.183" W x 6.375" D (20.79 cm W x 16.19 cm D)  
Surface cutout (inside rim)....... 7.683 0.0325" W x 5.875 0.0325" D  
(19.51 0.083 cm W x 14.92 0.083 cm D)  
Top plate (inside tilt plate)........ 5.90" W x 4.10" D (14.99 cm W x 10.41 cm D)  
Box (under surface)............... 4.0" H x 6.3" W (front of unit) x 5.0" D  
(10.2 cm H x 15.9 cm W x 12.7 cm D) without clamps  
4.0" H x 10.0" W (front of unit) x 5.0" D  
(10.2 cm H x 25.3 cm W x 12.7 cm D) with clamps  
Product weight  
video outPut  
Hsa 200se  
Number / Signal type........... 1 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs  
Connectors ....................... 5 BNC female on pigtails  
Nominal level .................... 0.7 Vp-p for RGB  
Minimum / Maximum levels... Analog: 0.3 V to 1.5 Vp-p  
Impedance........................ 75 ohms  
DC offset .......................... 5 mV with input at 0 offset  
NOTE: Output resolution may vary depending on whether or not the Extender is attached to the computer at startup,  
and also on the type of computer being used.  
synC  
Hsa 200se  
HSA 200S.......................... 4.0 lbs (1.8 kg)  
HSA 200SE ........................ 5.0 lbs (2.3 kg)  
Shipping weight  
HSA 200S.......................... 7 lbs (4 kg)  
HSA 200SE ........................ 8 lbs (4 kg)  
Vibration .......................... ISTA 1A in carton (International Safe Transit Association)  
Listings, certification ........... UL, CUL, CSA C/US  
Compliances  
HSA 200SE ........................ CE, FCC Class A, VCCI, AS/NZS, ICES  
MTBF .............................. 30,000 hours  
Input type......................... RGBHV, RGBS, RGsB, RsGsBs  
Output type....................... RGBHV, RGBS, RGsB, RsGsBs  
Input level ........................ 2.0 V to 5.0 Vp-p  
Output level ...................... TTL: 5.0 Vp-p, unterminated  
Input impedance ................ 510 ohms  
Output impedance .............. 75 ohms  
Max. propagation delay........ 18.8 ns  
Max. Rise / Fall time............ 4 ns  
Polarity ............................ Positive or negative (follows input)  
audio  
Hsa 200se  
Warranty .......................... 3 years parts and labor  
Gain................................ Unbalanced output: 0 dB; balanced output: +6 dB  
Frequency response ............ 20 Hz to 20 kHz, 0.5 dB  
NOTE: All nominal levels are at 10%. Specifications are subject to change without notice.  
THD + Noise...................... 0.025% @ 1 kHz, 0.020% @ 20 kHz at nominal level  
S/N................................. >90 dB at rated maximum output (21 dB, balanced)  
Stereo channel separation .... >75 dB @ 20 Hz to 20 kHz  
audio inPut — Hsa 200s  
Number / Signal type........... 1 stereo, unbalanced  
Connectors ....................... (1) 3.5 mm stereo female jack  
audio inPut — Hsa 200se  
Number / Signal type........... 1 stereo, unbalanced  
Connectors ....................... (1) 3.5 mm stereo female jack  
Impedance........................ >10k ohms unbalanced, DC coupled  
Nominal level .................... -10 dBV (316 mVrms)  
Maximum level .................. +6 dBu, (balanced or unbalanced) at 1% THD+N  
NOTE: 0 dBu = 0.775 Vrms. 0 dBV = 1 Vrms. 0 dBV ≈ 2 dBu.  
audio outPut — Hsa 200s  
Number / Signal type........... 1 pass-through stereo, unbalanced  
Connectors ....................... (1) 3.5 mm, direct insertion captive screw connector, 3 pole  
audio outPut — Hsa 200se  
Number / Signal type........... 1 stereo, balanced/unbalanced  
Connectors ....................... (1) 3.5 mm direct insertion captive screw connector, 5 pole  
Impedance........................ 50 ohms unbalanced, 100 ohms balanced  
Nominal level .................... Unbalanced output: -10 dBV (316 mVrms)  
Balanced output: -2 dBu (632 mVrms)  
Maximum level (Hi-Z) ........... >+14 dBu, balanced at 1% THD+N  
Maximum level (600 ohm) ..... >+5.5 dBm, balanced at 1% THD+N  
146  
USA West  
USA East  
© 2008 Extron Electronics. All rights reserved.  
Pricing and specifications may change without notice.  
+1.714.491.1500 / +800.633.9876  
+1.714.491.1517 FAX  
+1.919.863.1794 / +800.633.9876  
+1.919.863.1797 FAX  
 

Clover Electronics DVR CDR0850 User Manual
Coleman Camping Equipment 285A User Manual
Cooper Lighting Landscape Lighting H2BSMLRG User Manual
Cornelius TV Cables J18 User Manual
Craftsman Saw 31521222 User Manual
Dimplex Fan CUH05B31T User Manual
Dynex Network Card DX FC103 User Manual
Earthquake Sound Speaker System Platine Noiree User Manual
Escient Stereo System Digital Music Manager User Manual
Extron electronic Switch VYC 100N User Manual