Story TellerTM
Alarm Clock with Nightlight
and Projection Feature
See page 13
for your hidden
GEMSTONE FUN
button surprise!
OWNER'S MANUAL
BAR805
Barbie and associated trademarks and trade dress are owned by, and used under
license from, Mattel, Inc. ©2007 Mattel, Inc. All Rights Reserved.
SAFETY INSTRUCTIONS
1.
Read these instructions. Keep these instructions. Follow all instructions. Heed
all warnings.
2.
3.
4.
Do not use this unit near water.
Clean only with a dry cloth. Unplug this product from the wall before cleaning.
Do not block any ventilation openings. Install in accordance with
manufacturer’s instructions.
5.
6.
Do not install near any heat sources such as radiators, heat registers, stoves
or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding-type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet. This
product should be operated only from the type of power source indicated on
the marking label.
7.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the unit.
8.
9.
Only use attachments/accessories specified by the manufacturer.
Unplug this unit during lightning storms or when unused for long periods
of time.
10. Refer all servicing to qualified service personnel. Servicing is required when
the unit has been damaged in any way, such as the following: the power-
supply cord or plug has been damaged; liquid has been spilled or objects have
fallen into the unit; and/or the unit has been exposed to rain or moisture, does
not operate normally, has changed its performance or has been dropped. Do
not attempt to service this product yourself as opening or removing covers may
expose you to dangerous voltage or other hazards.
11. This unit should not be exposed to dripping or splashing water and no object
filled with liquids such as vases should be placed on the unit. Never push
objects of any kind into this unit through any openings.
12. Use only with the cart, stand, tripod, bracket or table specified
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
13. Do not overload wall outlet. Use only power source as indicated.
14. Use replacement parts as specified by the manufacturer.
15. The product may be mounted to a wall only if recommended by the
manufacturer.
16. Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks.
2
FCC WARNING:
This equipment may generate or use radio frequency energy. Changes
or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction
manual. The user could lose the authority to operate this equipment if an
unauthorized change or modification is made.
FCC INFORMATION:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
3
Emerson Radio Corp. has produced this audio product under
license from Mattel. We have taken great care to make sure your
unit was in perfect working order when it left our factory.
It has been designed to give you many years of enjoyment and
trouble-free operation. Read this manual before operating this unit
to become familiar with its features. In the event you require
technical assistance, please contact the Emerson Radio Customer
Service hotline at 1-800-898-9020. Retain this manual for
future reference.
WARNING
0-5
Choking Hazard–Small Parts and Packaging Materials. Not for children
under 5 years.
•
All materials for fastening or packing purposes are not part of the unit and
should be discarded for children’s safety.
Please keep all information for future reference.
This is not a toy.
•
•
NOTES:
•
•
•
Please avoid using this unit in places of high temperature or
humidity over prolonged periods of time as damage may occur.
Exposure to direct sunlight in places such as car interiors may
cause the unit to become warped and/or lead to malfunctioning.
Avoid using or storing this unit in dusty or sandy locations.
4
LOCATION OF CONTROLS
1
2
7
3
4
5
8
9
10
11
6
18
19
12
13
14
20
21
22
15
16
17
23
1. Projector
13. ALARM Switch
2. Projector Control
3. AM Indicator
4. VOLUME Control
5. ALARM ON Indicator
6. Battery Compartment
(Bottom of the Unit)
7. Night Light
(OFF/ON/AUTO/BUZZER)
14. Projector (ON/OFF) Switch
15. SLEEP Button
16. HOUR Button
17. MINUTE Button
18. Night Light (ON/OFF)
Switch
8. Display
19. AUX IN Jack (Rear of Unit)
20. BAND Switch (FM/AM)
21. ALARM/RESET Button
22. TIME Button
9. TUNING Control
10. GEMSTONE FUN (Sound)
Button
11. AC Cord
23. SNOOZE Button
12. Speaker
5
POWER SOURCES
Unravel the AC cord and connect it to a
conveniently located AC outlet having 120V
and 60Hz only. The Clock Display will illuminate
and a flashing time will appear in the window.
The Clock Display will continue to flash until the
time has been set.
AC Outlet
AC Plug
CAUTION: To prevent electric shock, match the wide blade of the plug to
the wide slot and fully insert.
If the AC cord is disconnected or if there is a
power failure, this electronic clock is designed to
continue operating internally (without showing the
time on the Clock Display) with a 9 volt battery
(not included). To install the battery, open the
Battery Compartment by pressing in the tab and
lifting off the door. Connect the battery to the terminals of the battery snap
inside the compartment (use of an alkaline battery is recommended) and
slide the Battery Compartment cover into place.
Be sure to check the condition of the battery periodically by disconnecting
the AC cord and connecting it again 2-3 minutes later. The preset times
should continue operating. If a flashing time appears on the Clock Display,
it indicates the battery is dead or not connected properly. The 9 volt battery
will keep the internal time accurately for approximately 30 minutes. If the
power is restored after 30 minutes, the time may need to be reset.
6
OPERATION
TO LISTEN TO THE RADIO
1
2
1
2
2
1
Tune
a
station by turning the
Slide the ALARM switch
1
to the
TUNING control
VOLUME control
1
.
Adjust the
ON position to turn the unit on.
2
as desired.
Slide the BAND switch
desired band (AM or FM)
2
to the
Antennas
FM: Extend and rotate the AC cord for better FM reception.
AM: Turn the unit for better AM reception.
TO SET OR RESET THE ACTUAL TIME
1
2
2
1
3
Press and hold the TIME button.
While holding the TIME button 1,
press the HOUR 2 and MINUTE 3
buttons to advance the time until
the desired time is shown on the
display. Make sure the AM indicator
is lit if the time is AM and not lit if the
time is PM.
7
OPERATION (CONTINUED)
TO SET OR RESET THE ALARM TIME
1
2
1
2
3
Press and hold the ALARM/RESET While holding the ALARM/RESET
button.
button 1, press the HOUR 2 and
MINUTE 3 buttons to advance the
time until the desired alarm time is
shown on the display. Make sure
the AM indicator is lit if the time is
AM and not lit if the time is PM.
TO SET THE ALARM TO WAKE TO RADIO
1
2
Set the alarm time as previously Slide the ALARM switch to the
instructed. Select a radio station and AUTO position. When the actual
make sure the VOLUME control is time matches the selected preset
set as desired.
alarm time, the radio automatically
turns on for one hour and 59
minutes and then shuts off.
NOTES:
• Make sure the volume is not set to the minimum; otherwise, when it
reaches the alarm time, you will not hear the radio sound.
• See next page to shut off the alarm and for the Snooze feature.
8
OPERATION (CONTINUED)
TO SET THE ALARM TO WAKE TO BUZZER
1
Set the alarm time as previously instructed. Slide the ALARM switch to the
BUZZER position. When the actual time matches the selected preset alarm
time, the buzzer will automatically sound for one hour and 59 minutes and
then shut off.
TO SHUT ALARM OFF
SNOOZE FUNCTION
1
1
2
1
To shut off the alarm, press the
ALARM/RESET button 1 once
and the alarm time will be reset for
the next day. Slide the ALARM
switch 2 to the OFF position to
turn off the alarm and not set it for
the next day.
The alarm can be temporarily
turned off manually by pressing
the SNOOZE button; the alarm
will turn back on automatically
nine minutes later.
9
OPERATION (CONTINUED)
TO ACTIVATE THE SLEEP FUNCTION
1
2
Slide the ALARM switch to the OFF, Press the SLEEP button, 0:59 will
AUTO or BUZZER position.
appear on the display and the unit
will come on, then release the
NOTE: When the ALARM switch is button.
set to the ON position, the SLEEP
function will be disabled.
3
4
2
1
To cancel sleep time before it counts
down to “00” and turn the radio off,
press the SNOOZE button.
If you press the SLEEP button 1
again after setting the sleep time,
the sleep time will be set to 59
minutes automatically. To turn off
the sleep time, press the SNOOZE
button 2.
NOTE:
To select a longer playing time up to a maximum of 1 hour and 59 minutes,
press the SLEEP and HOUR buttons simultaneously (the display will show 1
hour and 59 minutes). To adjust the minutes, press and hold the SLEEP button
and press the MINUTE button until the desired time is shown on the clock
display. Release the button when the preferred time is shown in the display.
10
OPERATION (CONTINUED)
TO ACTIVATE THE NIGHT LIGHT
1
2
Slide the NIGHT LIGHT switch to the Slide the NIGHT LIGHT switch to the
ON position to turn the night OFF position to turn the night
light on.
light off.
NOTE: The long-life LEDs inside the Night Light should last for the life of
the clock radio; they are not user-replaceable.
USING THE PROJECTOR
1
2
Slide the PROJECTOR switch to the Rotate the Projector control to select
ON position to turn on the projector; one of the images, see below.
an image will be projected on the Rotate the actual projector to
wall (maximum 8 feet).
position the image on the wall as
desired.
PROJECTOR IMAGES
11
OPERATION (CONTINUED)
USING THE AUX (AUXILIARY) JACK
By using a home audio connection cable (not included), an external
unit, such as a CD player or cassette player, can be heard through
this unit. Before making any connections, turn off the power to all
equipment.
1
2
Connect an external unit to the Start playback of the external unit
AUX IN jacks using a home audio and adjust the VOLUME control as
connection cable (not included). desired; the sound will be heard
Slide the ALARM switch to the ON through the unit’s speakers as the
position to turn the unit on.
Auxiliary input overrides the radio
when connected.
12
OPERATION (CONTINUED)
BarbieTM has a surprise just for you!
Just follow the instructions below and
see what you can do with your
GEMSTONE FUN button!
See what you
can do with
your GEMSTONE
FUN button!
Step 1
Listen to
Barbie stories
recorded
just for you!
Press the GEMSTONE FUN
(Sound) button on your clock radio.
This is how the Gemstone
"FUN" Button works: Press the
Gemstone "FUN" Button once
to here the first story, press it
twice to hear the second story
and three times to exit the
stories.
SURPRISE! With your GEMSTONE
FUN button, you can listen to
BarbieTM tell two full length stories.
NOTE: Press to hear two different
Barbie stories:
•
BarbieTM as the Princess and
the Pauper.
BarbieTM as the 12 Dancing
Princesses.
•
13
TROUBLESHOOTING GUIDE
If you experience a problem with this unit, check the chart below
before calling for service.
POSSIBLE
CAUSE
POSSIBLE
SOLUTION
SYMPTOM
GENERAL
Power does
not come on.
RADIO
AC cord not
plugged in.
Insert plug firmly
into AC outlet.
No sound.
ALARM switch is
Set ALARM switch
not set to ON position. to ON position.
VOLUME control at
minimum position.
Turn the VOLUME
control up.
Noise or sound
distorted on AM
or FM.
AM–Interference from Turn the radio for
traffic.
better AM reception.
Extend AC cord.
FM–AC cord
not extended.
ALARM switch is
in ON position.
Unit does not
turn off with
SLEEP feature.
CLOCK
Don’t set ALARM switch
to the ON position.
Flashing time.
Battery connected
improperly, not con-
nected or dead.
Clock not set.
Check the battery.
Set the clock.
Alarm does not
turn on.
ALARM switch is
not in AUTO or
Set ALARM switch
to the AUTO or BUZZER
position.
BUZZER position.
Clock not set.
Set the clock.
Alarm time not set.
Set alarm time.
14
EMERSON RADIO CORP.
LIMITED WARRANTY (Valid in the United States)
Emerson Radio Corp. warrants manufacturing defects in original material, including
original parts and workmanship, under normal use and conditions, for a period of ninety
(90) days from the date of original purchase in the U.S. With your dated proof of purchase,
we will provide repair service at no charge for labor and parts at an authorized Depot
Repair Facility, or replace the product in our discretion. For repair or replacement, pack
your unit in a padded box, enclose your check or money order payable to Emerson Radio
Corp. in the amount of $9.00 (not required by California residents) to cover shipping and
handling costs, and enclose a copy of your proof of purchase. Send your unit to:
Emerson Radio Corp.
5101 Statesman Drive
Irving, TX 75063
This warranty does not cover damage from negligence, misuse, abuse, accident, failure to
follow operating instructions, commercial use, rental, repairs by an unauthorized facility, or
products purchased, used, serviced or damaged outside of the United States.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAYALSO HAVE
OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
AU898M
The serial number of your system is located on a label on the bottom cabinet. Please take
a moment now to locate the serial number and write the number in the space provided
below. You may be asked to provide this number when calling for product service.
Model Number:
Serial Number:
BAR805
__________________________________________
15
®
BAR805-070307-01
Printed in China
|